• Rated AC Output: Grid-Tie: 7.6 kW
• AC Output Voltage: Grid-Tie: 120/240, 10 VAC
• AC Output Voltage: Backup: 120/240, 10 VAC
• AC Circuit Breaker: Backup: 50 A
• DC Input Voltage Range: 360 - 420 VDC
• Nominal DC Bus Voltage: 380 VDC
• Supported Battery Types: PWRcell Battery
• Batteries Per Inverter: Up to 2
• Supported PV Optimizers: PV Link
• Maximum Recommended DC Power from PV: 10 kW
• Internal DC Distribution Breakers: 4x 2P30A
• DC Fuses on Plus and Minus: 40 A
• 2-Pole Disconnect: Yes
• Protections: Ground-Fault Isolation Detection, Reverse-Polarity
• AC Topology: Transformerless
• Peak Efficiency: 97%
• CEC Weighted Efficiency: 96.5%
• Operating Temperature: -20 to 50 C (-4 to 122 F)
• Dimensions: 622 x 489 x 203 mm (24.5" x 19.25" x 8")
• Compliance: UL 1741 SA, CSA 22.2, IEEE 1547, Rule 21
• Compliance (Cont.): Rule 14H
• Peak Motor Starting Current (2 Sec.): 50 A, RMS
• Max. Cont. AC Power w/Single PWRcell Battery: 9,000 W
• Max. Cont. AC Power w/Two PWRcell Batteries: 11,000 W
• INML-OMNL PWRCELL INV EN | Download
• INML-OMNL PWRCELL INV SP | Download
• INML-OMNL PWRCELL INV FR | Download
• INST PWRCELL PRE-INSTALL CHECK GEN-EN | Download
• INST PWRCELL PRE-INSTALL CHECK GEN-SP | Download
• INST PWRCELL PRE-INSTALL CHECK GEN-FR | Download
• PWRVIEW SYSTEM SETUP GUIDE | Download
• PWRCELL COMMISSIONING QUICK START EN | Download
• PWRCELL COMMISSIONING QUICK START SP | Download
• PWRCELL COMMISSIONING QUICK START FR | Download
• PWRVIEW SYSTEM SETUP GUIDE SP | Download
• PWRVIEW SYSTEM SETUP GUIDE FR | Download
• SPEC 7.6KW 10 & 11.4KW 30 PWRCELL INV EN | Download
• PWAR PWRCELL LIMITED WARRANTY | Download
• WIRING DIAGRAMS PWRCELL SYSTEM | Download

Product Reviews