Manufacturer Info
Shared Rail Composition Mount
Engineered with our patented Elevated Water Seal Technology to make shared rail mounting simple and fast with unparalleled waterproofing. The Shared Rail Composition Mount is designed to work with rail systems in shared-rail and modified shared-rail configurations.
Shared rail systems cut down the number of rails, penetrations and components needed to reduce cost, weight and complexity. The Shared Rail Composition Mount assists with alignment of the rows of rail by providing 4.5 inches of north / south adjustability of the L-Foot.
The Shared Rail Composition Mount features a 9 x 12-inch aluminum flashing with alignment guides and rounded corners to easily slide under shingles and speed installation on the roof. Available in black finish.
Engineered with our patented Elevated Water Seal Technology to make shared rail mounting simple and fast with unparalleled waterproofing. The Shared Rail Composition Mount is designed to work with rail systems in shared-rail and modified shared-rail configurations.
Shared rail systems cut down the number of rails, penetrations and components needed to reduce cost, weight and complexity. The Shared Rail Composition Mount assists with alignment of the rows of rail by providing 4.5 inches of north / south adjustability of the L-Foot.
The Shared Rail Composition Mount features a 9 x 12-inch aluminum flashing with alignment guides and rounded corners to easily slide under shingles and speed installation on the roof. Available in black finish.
- Installation Guide | Download
- Designing Shared Rail (Quick Start Guide) | Download
- Engineering Report | Download
- Patented Elevated Water Seal Technology
- 4.5 inches of north / south adjustability of the L-Foot for optimal versatility
- Fewer rails, mounts and system parts needed
- Faster to design & install
- L-foot included
- Aluminum flashing with alignment guides and rounded corners
- Works with hidden end clamps
- Works with QRail
- All stainless steel hardware included
- Available in black finish
- 9" x 12" aluminum flashing
- Meets or exceeds roofing industry best practices; 100% IBC compliant
- 18-8 stainless steel hardware (included)
- Alignment guides
- 25-year warranty
| Included in kit | .04" thick, 9" x 12" aluminum flashing L-foot for .438" OD fastners 2x Hex-head lag screw, 5/16" x 4" 2x EPDM bonded sealing washer, 5/16" x 3/4" 5/16" x 7/8" serrated flange hex-head cap screw 5/16" serrated flange hex nut |
| Flashing size | 9" x 12" |
| Tools needed for installation | Tape measure Roofer’s bar/shingle ripper Chalk line Stud finder Caulking gun Sealant compatible with roofing materials Drill with 7/32" bit Drill or impact gun with 1/2" socket |
| Applicable roof types | Standard and high-definition composition/asphalt shingle roofs with 5" to 5-5/8" courses |
| Available finish | Aluminum mill Black |