Magnum Energy, MMSA1012-G, 1000 Watt, 12V Inverter/50 Amp PFC Charger, with GFCI, Anderson connector and 3 ft. AC cord
Manufacturer Info
The Magnum-Dimensions MMSA Series Inverter/Charger from Sensata Technologies is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Ideal for Emergency Vehicles, the MMSA is versatile, easy-to-use, lightweight, and provides a reliable base for your energy system.
The MMSA comes with DC cables with Anderson quick connectors, a GFCI outlet, and an AC input cord.
Auxiliary DC Output Port
Add a small load, such as an interior lamp or backup camera, of less than 20 amps. MMSA must be connected to the battery for the AUX output to be available.
Power Factor Corrected (PFC) Charger
Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.
Waterproof Panel
The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
Safe and Reliable
The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
Attractive Styling
The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Standard Transfer Relay
The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power.
Versatile Mounting
Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
Low/High Battery Protection
If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
Fan Cooled
The MMSA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Current Overload Protection
The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
Integrated Programming
The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
Battery Temp Sensor
Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
Buy with Ease
The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
- Product Specifications | Download
The MMSA comes with DC cables with Anderson quick connectors, a GFCI outlet, and an AC input cord.
Auxiliary DC Output Port
Add a small load, such as an interior lamp or backup camera, of less than 20 amps. MMSA must be connected to the battery for the AUX output to be available.
Power Factor Corrected (PFC) Charger
Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.
Waterproof Panel
The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
Safe and Reliable
The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
Attractive Styling
The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Standard Transfer Relay
The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power.
Versatile Mounting
Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
Low/High Battery Protection
If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
Fan Cooled
The MMSA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Current Overload Protection
The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
Integrated Programming
The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
Battery Temp Sensor
Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
Buy with Ease
The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
Other Products in This Category
Magnum Energy, MSH3012RV-L, 3000 Watt, 12V Inverter/125 Amp PFC Charger, Mobile version Hybrid with Load Support, Dual Input/Output, 50Amp transfer, RVC$2,917.02 $2,243.87
Magnum Energy, MSH4024M-L, 4000 Watt, 24V Inverter/105 Amp PFC Charger, Mobile version Hybrid with Load Support$2,846.55 $2,189.66
Magnum Energy, ME2012-20B-U, 2000 Watt, 12V Inverter/100 Amp PFC Charger/2-20A AC Breakers$1,419.65 $1,092.04
Magnum Energy, MS4048-20BL, 4000 Watt, 48V Inverter/60 Amp PFC Charger/2-20A AC Breakers$2,773.34 $2,133.34
