Manufacturer Info
1,500 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.
Generally speaking if your turbine has larger than a 6 foot rotor diameter and or is rated for 1KW or more you may need the 4KW clipper. Please consult tech support
Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Environmental Rating - Type 1 (Indoor)
The 1,500 watt AC Clipper comes in several different resistance values. The standard values available are 0.8 and 2.0 ohms per phase. Please add the value to the part number (For Example MNCLIP1.5KAC2.0) Please contact Customer service for help picking the correct resistance or if you need a value not listed.
Warranty - 5 yrs.
Made in the USA
Generally speaking if your turbine has larger than a 6 foot rotor diameter and or is rated for 1KW or more you may need the 4KW clipper. Please consult tech support
Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Environmental Rating - Type 1 (Indoor)
The 1,500 watt AC Clipper comes in several different resistance values. The standard values available are 0.8 and 2.0 ohms per phase. Please add the value to the part number (For Example MNCLIP1.5KAC2.0) Please contact Customer service for help picking the correct resistance or if you need a value not listed.
Warranty - 5 yrs.
Made in the USA
Other Products in This Category
Midnite Solar, MNPV12-250, String Combiner, 6-String (300V Breakers), 168A/300VDC Max, Nema3R$367.24 $282.49
Midnite Solar, MNPV8-MC4, String Combiner, 200A, 600DCV, Nema 3R, Pre-Wired for 8 Circuits with MC4 Connectors$767.77 $590.59
