Manufacturer Info
The model EM-71 electrical system monitor senses the +12 volt DC battery voltage in a vehicle or boat electrical system. The EM-71 is wired to the system's ground, +12 volt DC battery and +12 volt DC ignition switch. The unit monitors the +12Vdc battery voltage and detects fault conditions of battery high voltage (over 15.0 volts*) and battery low voltage (under 9.0 volts*). When a fault condition is detected, the EM-71 provides fault output signals that are switched to ground. These outputs can operate external warning lamps, alarm buzzers or control relays, and are rated for 75 milliamps (0.375 amps) DC.
These outputs are short-circuit protected and designed so they may be paralleled if only a single external lamp (or other device) is desired. It is also possible to install momentary light test switches (or just one if two isolating diodes are installed) which enable the operator to check the lamps to determine if they are functioning.
These outputs are short-circuit protected and designed so they may be paralleled if only a single external lamp (or other device) is desired. It is also possible to install momentary light test switches (or just one if two isolating diodes are installed) which enable the operator to check the lamps to determine if they are functioning.
- Electrical System Monitors | Download
Other Products in This Category
Vanner Inc, 80-80CAN, 24 to 12 Volt Battery Equalizer - 80 Amp Output (Internal M1200 Monitor)$1,466.27 $1,127.90
Vanner Inc, 70-80CAN, Battery Equalizer, 24 to 12 Volt - 80 Amp w/ Monitor (Internal EM-70D)$1,364.08 $1,049.29
Vanner Inc, 81-100CAN, Military Grade - 24 to 12 Volt Battery Equalizer - 100 Amp Output (Internal M1200 Monitor)$1,879.18 $1,445.52
Vanner Inc, 70-60CAN, Battery Equalizer, 24 to 12 Volt 60 Amp w/ Monitor (Internal EM-70D)$1,216.90 $936.08
Vanner Inc, 80-100CAN, 24 to 12 Volt Battery Equalizer - 100 Amp Output (Internal M1200 Monitor)$1,879.18 $1,445.52