Our InSight Series 24V lithium iron phosphate battery is a GC2 sized drop-in replacement battery that delivers high-quality performance, power, and precision. This 24V 60 Ah battery was designed specifically to meet the power and energy requirements in floor machines, electric motorized hand trucks, walk-behind pallet jacks, and other material handling applications. By eliminating the "opportunity charge" often required with lead-acid batteries, operators can complete their task without having to stop, charge and wait!
InSight batteries are drop-in ready and easy to install, just connect them in parallel for the capacity you need. No need to modify trays, no complicated connections, and no heavy lifting.
They're also scalable, so you can provide increased power and energy (up to 360Ah) as needed. InSight batteries are connected in parallel (up to 6) which means you have the freedom and flexibility to use the right amount of batteries for your equipment, typically two to six batteries.
InSight batteries also feature an elegant BMS that provides precision balancing within a battery and between batteries in a parallel system without the need for charging batteries individually. In addition, our proprietary software determines and manages regenerative currents - unlike any other battery solution - avoiding unnecessary battery disconnects.
With InSight, you get unmatched quality and performance, from the inside out. It's the only lithium battery like it on the market today!
| Functional Specifications |
| Nominal Voltage | 25.6 |
| Cell Chemistry | LiFePO4 |
| Cell Type | Prismatic |
| Ampere-hour Capacity | 60Ah |
| Watthour Capacity | 1.536kWh |
| Specific Energy | 128Wh/kg |
| Charge Efficiency | 99% |
| Impedance (50% SOC, 1kHz) | <100m? |
| Cycles @ 80% DOD | >6000 |
| Mechanical Specifications |
| BCI Size | GC2 / GC8 |
| Dimensions (LxWxH) | 10.2 x 7.1 x 10.9 in (260 x 180 x 276 mm) |
| Weight | 34.4 lbs (15.6 kg) |
| Case Material | ABS |
| Stud Terminal | M8 X 1.25 - 20 |
| Insert Terminal | M8 X 1.25 - 20 |
| Torque | 79.7-88.5 in-lbs. 6.6-7.4 ft-lbs. 9-10 N-m |
| Handles | Molded |
| Ingress Protection Marking | IP67 |
| Case Flame Rating | UL94 V-0 |
| Discharge Specifications |
| Continuous Discharge Current | 100A |
| Peak Discharge Current | 240A - 15 sec |
| Peak Discharge Current | 440A - 30 msec |
| Short Circuit Protection | 880A - 610 ?sec |
| Protection Recover | Automatic |
| Low Voltage Disconnect | 20V - 5 sec (2.5vpc) |
| Low Voltage Reconnect | Automatic |
| Self-Discharge per Month @ 25C in OFF mode | 2.80% |
| Charge Specifications |
| Continuous Charge Current | ? 60A |
| Disconnect Charge Current | 65A - 5 sec |
| Recommended Charge Voltage | 27.6V |
| Float Voltage | 27.2V |
| High Voltage Disconnect | 29.6V (3.7vpc) (4 sec) |
| High Voltage Reconnect | Automatic |
| Temperature Compensation | None |
| Environmental Specifications |
| Charge Temperature | 32F to 131F (0C to 55C) |
| Discharge Temperature | -22F to 149F (-30C to 65C) |
| Operating Humidity | <90% RH |
| Storage Temperature | -4F to 95F (-20C to 35C) |
| Storage Humidity | 25 to 85% RH |
| Certifications |
| UL2580 (Cell) | File Number: MH63797 |
| UL2271 (Battery Pack) | PENDING |
| CE (Battery Pack) |
| IEC 62133 (Battery Pack) |
| UN38.3 (Battery Pack) |
| Shipping Classification |
| UN 3480, Class 9 |