Outback Communications
-
Outback, AXS PORT, OutBack Modbus/TCP Interface Device for remote system communication and control using Modbus over Ethernet
The AXS Port Modbus TCP, now OPTICS RE compatible, is a powerful and economical tool that allows installers and system owners the ability to monitor...
Model: AXS PORT
Manufacturer: Outback Power -
Outback, Csip Bridge, Comm Accessory For Ca Rule 21 Phase 2
Utility Communications CA Rule 21 Phase 2, UL 1741 SB, and IEEE SunSpec 2030.5 New changes to grid interconnection standards now require secure...
Model: CSIP BRIDGE
Manufacturer: Outback Power -
Outback, FN-DC, FLEXnet DC monitors up to 3 Shunts for improved battery management (Includes twisted pair wire and communications cable)
OutBack Power's FLEXnet DC is the ultimate DC system monitoring device. Our integrated networked communications make valuable, usable data available...
Model: FN-DC
Manufacturer: Outback Power -
Outback, FW-SP-250, FLEXware 250 Compatible FLEXware Surge Protector
The OutBack Power FLEXware Surge Protector is a seamlessly integrated balance-of-system component for the FX Series Inverter/Charger. The FLEXware...
Model: FW-SP-250
Manufacturer: Outback Power -
Outback, FW-SP-ACA, FW-ACA with FLEXware Surge Protector for FLEXware 500 and FLEXware 1000
The OutBack Power FLEXware Surge Protector is a seamlessly integrated balance-of-system component for the FX Series Inverter/Charger. The FLEXware...
Model: FW-SP-ACA
Manufacturer: Outback Power -
Outback, FW-X240, 4.0 kVA 120/240 VAC 60 Hz with 20 Amp autotransformer dual-pole breaker for mounting inside of FW500 or FW1000 AC enclosures. (Includes dual-pole 25 Amp AC breaker)
For step-up, step-down and balancing applications. PSX-240 (Autoformer with Housing) The OutBack PSX-240 (6 kVA) autotransformer can be used for 120...
Model: FW-X240
Manufacturer: Outback Power -
Outback, FWPV3-FH600-S2D, PV rapid shutdown combiner for SkyBox. Pre-wired with two contactors and six 600 VDC fuse holders, to support three PV strings. Includes cable glands and touch-safe distribution blocks, one ground bus bar and grounding lug. (Fuses and RSI sold separately.)
OutBack Power FWPV3-FH600-S2D PV rapid shutdown combiner for SkyBox. Pre-wired with two contactors and six 600 VDC fuse holders, to support three PV...
Model: FWPV3-FH600-S2D
Manufacturer: Outback Power -
Outback, FWPV4-FH600, Combiner box pre-wired with four 600 VDC fuse holders, cable gland and touch-safe distribution blocks. Includes one ground bus bar. (Fuses sold separately.)
FLEXware ICS The OutBack Power FLEXware ICS combiner box is a cost-effective integrated solution for solar installations requiring basic combining...
Model: FWPV4-FH600
Manufacturer: Outback Power -
Outback, FWPV6-FH600, Combiner box pre-wired with six 600 VDC fuse holders, cable glands and touch-safe distribution blocks. Includes one ground bus bar. (Fuses sold separately.)
FLEXware ICS The OutBack Power FLEXware ICS combiner box is a cost-effective integrated solution for solar installations requiring basic combining...
Model: FWPV6-FH600
Manufacturer: Outback Power -
Outback, FWPV6, Combiner box integrated with cable gland and touch-safe distribution blocks. Accommodates up to six 600 VDC rated fuse holders. Includes one ground bus bar. (Fuses and fuse holders sold separately. Integrated cable gland accommodates up to four PV source circuits, additional cable gland may be purchased.)
FLEXware ICS The OutBack Power FLEXware ICS combiner box is a cost-effective integrated solution for solar installations requiring basic combining...
Model: FWPV6
Manufacturer: Outback Power -
Outback, HUB10.3, Ten Port with Sub-Phase Master Stacking, up to 10 devices and one MATE
The HUB system communications manager is the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load...
Model: HUB10.3
Manufacturer: Outback Power -
Outback, HUB4, Four Port, up to 4 devices and one MATE
The HUB system communications manager is the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load...
Model: HUB4
Manufacturer: Outback Power -
Outback, ICSPLUS-1, ICS Plus PV rapid shutdown and AFCI system package for battery-based PV systems. Compatible with up to six strings of PV source circuits (one charge controller). Includes one FWPV6-FH600-SDA combiner box, one RSI, one BKR-CTRL-DC and one PNL-75-DC-RT.
FLEXware ICS Plus FLEXware ICS Plus is the first end-to-end solution listed to UL 1741 with photovoltaic rapid shutdown systems (PVRSS) for both...
Model: ICSPLUS-1
Manufacturer: Outback Power -
Outback, ICSPLUS-2, ICS Plus PV rapid shutdown and AFCI system package for battery-based PV systems. Compatible with up to twelve strings of PV source circuits (two charge controllers). Includes two FWPV6-FH600-SDA combiner boxes, one RSI, one BKR-CTRL-DC and one PNL-75D-DC-RT.
FLEXware ICS Plus FLEXware ICS Plus is the first end-to-end solution listed to UL 1741 with photovoltaic rapid shutdown systems (PVRSS) for both...
Model: ICSPLUS-2
Manufacturer: Outback Power -
Outback, ICSPLUS-4, ICS Plus PV rapid shutdown and AFCI system package for battery-based PV systems. Compatible with up to twenty-four strings of PV source circuits (four charge controllers). Includes four FWPV6-FH600-SDA combiner boxes, one RSI, one BKR-CTRL-DC and one PNL-75Q-DC-RT.
FLEXware ICS Plus FLEXware ICS Plus is the first end-to-end solution listed to UL 1741 with photovoltaic rapid shutdown systems (PVRSS) for both...
Model: ICSPLUS-4
Manufacturer: Outback Power -
Outback, MATE_B, G/FX version, Black oval housing with RS232 serial port
The MATE system display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE, you can...
Model: MATE_B
Manufacturer: Outback Power -
Outback, MATE, G/FX version, Gray oval housing with RS232 serial port
The MATE system display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE, you can...
Model: MATE
Manufacturer: Outback Power -
Outback, MATE2, G/FX version, Black square housing with RS232 serial port
The MATE system display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE, you can...
Model: MATE2
Manufacturer: Outback Power -
Outback, MATE3s, Universal version required by (V)FXR and GS inverters, Dark gray square housing with Ethernet port
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system. An intuitive user interface...
Model: MATE3s
Manufacturer: Outback Power -
Outback, PNL-GFDI-80Q, PV Ground-Fault Detector Interrupter 80 Amp 150 VDC four pole panel mount
Ground fault detection and interruption is required by the NEC as a safety precaution. The OutBack PV Ground-Fault Detection and Interruption System...
Model: PNL-GFDI-80Q
Manufacturer: Outback Power