IPSi3600 Series AC Inverters BENEFITS - Proven technology
- Rugged & reliable for years of safe and trouble free operation
- Multiple battery voltages supported by each model
- Product Datasheet | Download
The IPSi Series of 'Intelligent Pure Sinewave' Inverters are designed specifically for running computers and other sensitive AC loads in rugged mobile and other off-grid environments.
Two standard AC receptacles (circuit breaker protected) plus a dedicated hardwire connection provide for easy connection of loads.
Models are available for 110 or 220 Volts AC Out at 50 or 60 Hz (user selectable), and to operate from 20-45 or 40-80 Volts DC In to cover all standard DC battery voltages from 24 to 64 volts nominal (includes 72V Rail.
Using the free to download 'Power Wizard' software, the user can select output frequency, output voltage and low voltage shutdown parameters from any laptop through the standard usb interface.
Features - Pure Sine Wave output - 110 VAC or 220 VAC at 50 or 60 Hz fully regulated output, exactly the same as household AC
- Hard Wire and Plug-In (NEMA 5-20 or Euro CEE 7/7) AC output connections standard
- Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
- Digital Signal Processor controlled
- State-of-the art MosFet technology for efficient and reliable operation
- Toroidal transformer type output to protect computers and other sensitive equipment from surges and spikes
- ON-OFF switch illuminated by AC output for positive indication of proper operation
- Thermostatically controlled fan
- Programmable low voltage warning and shutdown to protect the batteries
- Over voltage and over temperature warning and shutdown to protect the inverter.
- Current limiting and short circuit protection
- Isolated input for positive or negative ground operation
- Diagnostic LEDs and Audible Alarm
Options - CANBUS or RS485 communication option
- Remote digital display and control option
- OFF-Line UPS option
| Nominal (ip) | 24, 28, 32 or 36 VDC | 48 or 72 VDC |
|---|
| Actual (Vdc) | 20 - 50 | 40 - 80 |
|---|
| Input Amps (Max) | 180 | 90 |
|---|
| Output Nominal (op) | 110 | 220 |
|---|
| Output Volts (AC) | 110 10 VAC (user adjustable) | 220 20 VAC (user adjustable) |
|---|
| Output Amps | 30A (cont) / 36A (peak) | 15A (cont) / 18A (peak) |
|---|
| Output Frequency | 50.00 or 60.00 Hz 0.01 Hz (user selectable) |
|---|
| Output Distortion | < 2% at 3600 Watts into resistive load |
|---|
| Regulation (Line & Load) | < +/- 2.0% |
|---|
| Duty Cycle | Continuous 100% for 24 hours per day |
|---|
| Efficiency | >90% @ Maximum Output |
|---|
| Operating Temp. Range | -25 to +40C @ maximum output (-40C Optional) |
|---|
| Humidity | 0 - 95% Relative Humidity(non-condensing) with standard conformal coating |
|---|
| Audible Noise | 34.5 dB @ 3 ft |
|---|
| Typical Service Life | >10 years (87,600 hours) |
|---|
| Isolation | Input to Output, Output to Case and Input to Case 1500 VDC |
|---|
| Length | 15.6 in +/- 0.1 in / 39.7 cm +/- 0.3 cm |
|---|
| Width | 12.0 in +/- 0.1 in / 30.5 cm +/- 0.3 cm |
|---|
| Height | 8.0 in +/- 0.1 in / 21.3 cm +/- 0.3 cm |
|---|
| Clearance | 1 inch (2.5 cm) all around |
|---|
| Material | Marine Grade Aluminium |
|---|
| Finish | Black Anodize / Powder Epoxy Coat |
|---|
| Fastenings | All 18-8 Stainless Steel |
|---|
| Weight | 69.5 lbs / 31.5 kg |
|---|
| Connections | DC In – 3/8 x 16 Inch Imperial Threaded Studs c/w nutsAC Out – 2 x 20A 125V NEMA 5-15 receptacles or 2 x 16A 250V CEE 7/7 receptacles with circuit breaker protection, plus one 30A hardwire connection AC In – one 30A hardwire connection |
|---|
| Warranty | Three years parts and labor |
|---|
