The images shown are for illustration purposes only and may not be an exact representation of the product

Analytic Systems, IPSi1200-12-110, 1200 Watt, 10.5-16V In, 110VAC Out, Intelligent PureSine Inverter

  • Model: IPSi1200-12-110
  • Manufactured by: Analytic Systems
  • Condition: New
  • Estimated Delivery: 2 to 3 Weeks
  • Built to Order - This Product Cannot Be Cancelled Once Order Is Placed
Price:

$2,420.15 $1,861.65

Manufacturer Info

IPSi1200 Series AC Inverters

BENEFITS
  • Proven technology
  • Rugged & reliable for years of safe and trouble free operation
  • Multiple battery voltages supported by each model
  • Product Datasheet | Download
  • Product Manual | Download
The IPSi Series of 'Intelligent Pure Sinewave' Inverters are designed specifically for running computers and other sensitive AC loads in rugged mobile and other off-grid environments.

One standard AC receptacle (circuit breaker protected) plus a dedicated hardwire connection provide for easy connection of loads. Models are available for 110 or 220 Volts AC Out at 50 or 60 Hz (user selectable), and to operate from 11-15, 20-45 or 40-90 Volts DC In to cover all standard DC battery voltages from 12 to 64 volts nominal (includes 72V Rail).

Using the free to download 'Power Wizard' software, the user can select output frequency, output voltage and low voltage shutdown parameters from any laptop through the standard usb interface.

Features
  • Pure Sine Wave output - 110 VAC or 220 VAC at 50 or 60 Hz fully regulated output, exactly the same as household AC
  • Hard Wire and Plug-In (NEMA 5-20 or Euro CEE 7/7) AC output connections standard
  • Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
  • Digital Signal Processor controlled State-of-the art MosFet technology for efficient and reliable operation
  • Toroidal transformer type output to protect computers and other sensitive equipment from surges and spikes
  • ON-OFF switch illuminated by AC output for positive indication of proper operation
  • Thermostatically controlled fan
  • Programmable low voltage warning and shutdown to protect the batteries
  • Over voltage and over temperature warning and shutdown to protect the inverter
  • Current Limiting and Short circuit protection
  • Isolated input for positive or negative ground operation
  • Diagnostic LEDs and Audible Alarm
Options
  • CANBUS or RS485 communication option
  • Remote Digital Display and Control option
  • OFF-line UPS option
Nominal (ip) 12 VDC 24, 28, 32 OR 26 VDC 48 or 72 VDC
Actual (Vdc) 11 - 15 20 - 45 40 - 90
Input Amps (Max) 120 60 30
Output Nominal (op) 110 220
Output Volts (AC) 110 10 VAC (user adjustable) 220 20 VAC (user adjustable)
Output Amps 10A (cont) / 12A (peak) 5A (cont) / 6A (peak)
Output Frequency 50.00  or 60.00 Hz 0.01 Hz (user selectable)
Output Distortion < 2% at 1200 Watts into resistive load
Regulation (Line & Load) < +/- 2.0%
Duty Cycle Continuous 100% for 24 hours per day
Efficiency >90% @ Maximum Output
Operating Temp. Range -25C to +40C @ maximum output (-40C Optional)
Humidity 0 - 95% Relative Humidity(non-condensing) with optional conformal coating
Audible Noise 34.5 dB @ 3 ft
Typical Service Life >10 years (87,600 hours)
Isolation Input to Output, Output to Case & Input to Case 1500 VDC
Length 13.4 in +/- 0.1in / 33.9cm +/- 0.3cm
Width 9.4 in +/- 0.1 in / 23.8 +/- 0.3 cm including mounting flanges
Height 7.7 in +/- 0.1 in / 19.6 +/- 0.3 cm
Clearance 1 inch (2.5 cm) all around
Material Marine Grade Aluminium
Finish Black Anodize / Powder Epoxy Coat
Fastenings All 18-8 Stainless Steel
Weight 30.0 lb / 13.6 kg
Connections DC In – Marathon ST722B2502UH, 175 Amp, 300V Rating c/w Protective Snap On CoverAC Out – 1 x NEMA 5-15 receptacle or 1 x 16A 250V CEE 7/7 receptacles with circuit breaker protection, plus one 30A hardwire connectionAC In – one 30A hardwire connection (with Off-Line UPS Option)
Warranty Three years parts and labour

Product Reviews

Copyright © 2024 Inverter Supply | Privacy Notice