Description- Connect the Battery and Charge Controller - Renogy offers a range of different lengths, as well as four gauge sizes to choose from. 3/8 inch round center hole.
- TUV LISTED - The cable meets TUV standards for PV solar application.UV resistant and waterproof. Produce optimal power output even in high-temperature conditions.
- RELIABLE QUALITY - Heat-shrink tubing insulates wires, provides abrasion resistance and electrical safety.
- PURE COPPER - Tin-plated copper terminals to minimize corrosion and the pure oxygen-free copper wiring ensures maximum conductivity.
- Warranty | Download
Connect your charge controller to the battery with a pair of Renogy high-quality copper tray cables. Specialized with battery rings on one end for effortless connection to your battery and exposed stranded wire on the other end to lead directly into your charge controller, this wire makes the system set up as easy as can be!
Step 1 Materials & Tools Ready
1. Solar charge controller
1 AC Terminal Block
2. Battery
3. Battery cables (with terminal rings on one end and stripped at the other.
4. Fuse set with cable
5. Wire crimper and screwdriver
STEP 2 Connect the Cable with Charge Controller
Insert the stripped end and screw the terminal shut. All Renogy Charge Controller have the battery terminals labeled with a battery icon"BATT".
STEP 3 Connect the Fuse to the Positive Battery Cable The Renogy ANL fuse will protect the charge controller, wire, and battery from over-current. The fuse set and fuse cable are available from Renogy.
STEP 4 Connect the Battery Cables to the Battery
Connect the negative battery cable to the negative battery terminal and the positive cable to the positive terminal.
STEP5 Charge Controller Turn On Now
Check the installation instructions in your charge controller's manual and set up the battery type correctly.
STEP 6 Double Check All Your Connections
Double check all your connections to make sure that none are loose.
Package Includes- Renogy Solar Tray Cables / one pair x 1 (pair)
| Battery to Charge Controller Tray Cables for 3/8 in Lugs |
|---|
| RENOGY 4AWG WIRE COPPER SOLAR TRAY CABLES FOR CONNECTING CHARGE CONTROLLER TO BATTERY (A PAIR) |
| Length | 8FT/16FT (20.3cm / 40.6cm) |
| Gauge (Wire Size) | 4AWG / 21.2mm² |
| Terminal Size | 3/8 in Lugs (M10) |
| Max. Current | 95A |
| Rating Voltage | 600/1000V |
| Temperature | -40°F to +185°F |
| RENOGY 8AWG WIRE COPPER SOLAR TRAY CABLES FOR CONNECTING CHARGE CONTROLLER TO BATTERY (A PAIR) |
| Length | 8FT/16FT (20.3cm / 40.6cm) |
| Gauge (Wire Size) | 8AWG / 8.4mm² |
| Terminal Size | 3/8 in Lugs (M10) |
| Max. Current | 55A |
| Rating Voltage | 600/1000V |
| Temperature | -40°F to +185°F |
| RENOGY 10AWG WIRE COPPER SOLAR TRAY CABLES FOR CONNECTING CHARGE CONTROLLER TO BATTERY (A PAIR) |
| Length | 8FT/16FT (20.3cm / 40.6cm) |
| Gauge (Wire Size) | 10AWG / 5.3mm² |
| Terminal Size | 3/8 in Lugs (M10) |
| Max. Current | 30A |
| Rating Voltage | 600/1000V |
| Temperature | -40°F to +185°F |
| RENOGY 12AWG WIRE COPPER SOLAR TRAY CABLES FOR CONNECTING CHARGE CONTROLLER TO BATTERY (A PAIR) |
| Length | 8FT/16FT (20.3cm / 40.6cm) |
| Gauge (Wire Size) | 12AWG / 3.3mm² |
| Terminal Size | 3/8 in Lugs (M10) |
| Max. Current | 20A |
| Rating Voltage | 600/1000V |
| Temperature | -40°F to +185°F |
| WARRANTY INFORMATION |
| Accessories | 1-year material warranty |
