The MS Series Inverter/Charger - a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.
Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your utility power cable to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Features - Pure Sine Wave
- 12, 24 and 48V configurations
- Versatile Mounting
- Lightweight
- Multiple Comm Ports
- Expanded Transfer Relay
- Owners Manual | Download
- Spec Sheet | Download
Options Remote Panel ME-ARC, ME-RC
Transfer Relay 30 ACC max. each input, 60ACC total
Charger Type Power Factor Corrected with 3-Step
Input Current 30 AAC
Output Current 60 ADC
| Output Power | 4,750W |
| Peak Watts | 8,500W |
| Warranty | 3 |
| Output Voltage | 120 VAC |
| Output Peak | 120amps |
| Output Current | 72amps |
| Output Waveform | Pure Sine |
| Output Frequency | 60 Hz |
| Input Voltage | 48 |
| Continuous Output Amps | 72amps |
| Operating Temp | -20C to +60C (-4F to 140F) |
| Efficiency | 94% |
| Weight | 55 lb (24.9 kg) |
| Dimensions | 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
| UL Certified | Yes |
| Phase | Single |
| Topology | Low Frequency |
| Input Battery Voltage Range | 36 - 67.6 VDC |
