Generac's Smart Power Management System is designed to optimize the performance of a standby generator. The system can consist of up to 8 individual Smart Management Modules (SMM). Unlike other load management systems that depend on another control device, the SMM modules are self-aware and operate autonomously.
Frequency is the true measure of generator engine performance and does not need to factor in increased ambient temperatures, elevation changes, or generator fuel type. The modules monitor the frequency (Hz) of the power being produced by Generac's standby generators. If frequency falls below a certain threshold, the module will automatically follow a power management algorithm to reduce the chance of a generator overload condition.
The modules can be set to a load priority between 1-8, or be set in a lock-out only mode for loads that do not need to run in an outage. This reduces the minimum size of the generator for a more cost-effective solution.
- OMNL INTEL LOAD MGMT NC GEN SPFR | Download
- OMNL INTEL LOAD MGMT NC GEN EN | Download
- SPEC INTEL LOAD MGMT NC GEN EN | Download
- SPEC INTEL LOAD MGMT NC GEN SP | Download
- SPEC INTEL LOAD MGMT NC GEN FR | Download