Analytic Systems, VTC605-12-12, Step-Up DC/DC Converter
Manufacturer Info
Step up a 12 VDC battery to between 13.5 and 17.0 or 24.0 and 27.5 VDC in 0.5 VDC increments (via 3 position DIP switch), or stabilize a 12 or 24 VDC power system.
Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, a dry contact alarm relay output and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage, the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include remote panel monitoring with On/Off control.
Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.
Features
Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, a dry contact alarm relay output and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage, the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include remote panel monitoring with On/Off control.
Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.
Features
- Vibration proof output voltage adjustment by 3 position DIP switch
- Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
- Extremely rugged and well suited for marine and other demanding environments
- High tolerance for shock and vibration
- Ultra-quiet low EMI operation
- Current limiting protection
- Reverse input protection
- Output over-voltage crowbar
- Dry contact output fail relay
- Remote control option
- Wide-Temperature operation Available
- Parallel output diodes available
- Conformal Coating and/or Harsh Environment Ruggedization Available
- 3 year parts and labour warranty
- Product Specifications | Download
- Product Manual | Download
- Marine & other rugged environments
- Mobile Offices (TV and Radio Vans)
- Automotive / RV
- Electric Utilities and Substations
- Base Station Power(Radio & Telecommunications)
- Industrial Controls(OEM Applications)
- Field Work / Construction Sites
- Solar/Alternative Power Systems
- Any 12 or 24V Equipment
Input Volts(DC) | 10.5-18 | 10.5-28 |
---|---|---|
Input Amps (Max) | 50 | |
Input Fuse (AGC) | 25x 2 Amp | |
Noise on Input | < 50 mV | |
Low InputVoltage Alarm | 10.5 VDC | |
Current Limit | 50 Amps in |
Output Nominal (op) | 12 | 24 |
---|---|---|
Output Volts (DC) | Input - 1V or 13.5 to 17.0 Whichever is greater | Input - 1V or 24.0 to 27.5 Whichever is greater |
Output Adjustment | * 45 | |
Output Crowbar | Programmed Output Volts x (1.3 1%) | |
Output Ripple & Noise | < 50 mV | |
Low OutputVoltage Alarm | Programmed OutputVoltage minus 2.5 VDC | |
Transient Response | < 1V for 50% Surge | |
Regulation(Line & Load) | < +/- 0.5% | |
Duty Cycle | Continuous 100% for 24 hours per day | |
Efficiency | > 90% @ Maximum Output |
Operating Temp. Range | -25 to +40C @ maximum output Derate Linearly 2.5% perC from 40C(Optional -40C extra wide temp. operation avail.) |
---|---|
Humidity | 0 - 95% Relative Humidity(non-condensing) with optional conformal coating |
Audible Noise | NONE db @ 3 ft |
Typical Service Life | >10 years (87,600 hours) |
Isolation | Any Input or Output to Case 500 VDCInput to Output – Common Negative |
Length | 9.1 in/ 23.1 cm |
---|---|
Width | 7.8 in/ 19.8 cm |
Height | 4.3 in/ 10.8 cm |
Material | Marine Grade Aluminium |
Finish | Black Anodize / Powder Epoxy Coat |
Fastenings | All 18-8 Stainless Steel |
Weight | 6.0 lb / 2.7 kg |
Connections | Four contact output terminals |
Warranty | 3 years |