The images shown are for illustration purposes only and may not be an exact representation of the product

Blue Sea Systems, 7623100, ML-ACR Automatic Charging Relay Manual 24V

  • Model: 7623100
  • Manufactured by: Blue Sea Systems
  • Condition: New
  • Estimated Delivery: 1 to 2 Weeks
  • Lead Time To Ship May Vary
Price:

$358.36 $275.66

Manufacturer Info

500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine
  • Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
  • Automatically manages the charging of two large battery banks
  • Allows paralleling of battery banks for emergency starting
  • 500 Ampere continuous rating to support high-output alternators
  • Magnetic Latch (ML) - ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
  • Dual sensing - senses charge on both battery banks
  • Start Isolation (SI) - can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
  • Engine Isolation (EI) - can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
  • Senses charging on two battery banks
  • LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
  • 7/8" (22mm) stud length accepts multiple cable terminals
  • Silver alloy contacts provide high reliability for switching live loads
  • Label recesses for circuit identification
  • Wiring Diagram | Download
  • Dimension Drawing | Download
  • ML-ACR Troubleshooting Guide | Download
  • Instructions | Download
Specifications
Control Circuit Connection Deutsch DTM
Nominal Voltage 24V DC
Manual Control Yes
Engine Isolation Yes
Mounting #10
Start Assist Yes
Start Isolation Yes
Amperage Operating Current 13mA
Amperage Operating Current when changing state <7.0A
Terminal Stud Torque 140 in-lb (15.82 Nm)
Continuous Rating 500A
Intermittent Rating 700A (5 min)
Cranking Rating 30 sec 1450A DC
Cable Size to Meet Ratings 4/0 AWG x 2
Live Current Switching 300A @ 12V DC
Switching Cycles 100000
Terminal Ring Diameter Clearance 1.18in (29.97 mm)
Terminal Stud Length 1.50in (38.1 mm)
Terminal Stud Size 3/8" - 16 (M10)
Relay Contact Position
Combine 30 sec 27.0V
Combine 90 sec 26.0V
Open 10 sec 24.7V
Open 30 sec 25.5V
Open High 32.4V
Included
Qty PN Product
1 2146 SPDT Remote Control Contura Switch - ON-OFF-ON
Optional Accessories
9160 ML Series Link Bus

Product Reviews

Copyright © 2024 Inverter Supply | Privacy Notice