Manufacturer Info
This 3R pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using standard 10mm x 38mm fuses up to 80 amps total.
The Pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using 10mm x 38mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders ( MNTS) and fuses allow operation up to 600 Volts. The MNPV4 is rated for up to 80 amps.
INCLUDED FEATURES
The Pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using 10mm x 38mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders ( MNTS) and fuses allow operation up to 600 Volts. The MNPV4 is rated for up to 80 amps.
INCLUDED FEATURES
- Type 1 environmental rating
- Fast, Convenient hook up with industry standard connectors
- All aluminum powder coated housing that won't rust
- Flip up cover that can stay in the open position during installation
- PV Negative bus bar with #6 and 1/0 connections
- Chassis ground bus bar with #6 and 1/0 connections
- Standard DIN rail with (x) 30 amp touch safe fuse holders. 15 amp fuses included
- Tin plated copper bus bar that connect PV Plus outputs
- Dead front cover (MNPV6DF) snaps into place after wiring is complete for safety
- Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides
- Top surface is available to bring conduit in from directly above the enclosure
- Warranty - 5 yrs.
- Listed by ETL for US & Canada
- Made in the USA
- PV Combiner Brochure/Spec Sheet | Download
- PV Combiner Brochure/Spec Sheet - Spanish | Download
- 3R Combiner Roof Pitch | Download
- MNPV2 & 4 Pre-wired | Download
- PV Combiner Specifications | Download
Other Products in This Category
Midnite Solar, MNCLIP4KAC0.4, 4, 000 watt AC Clipper for wind or Hydro designed to work with the Midnite Classic.
$2,716.71 $2,089.78
$2,716.71 $2,089.78
Midnite Solar, MNCLIP4KAC1.6, 4, 000 watt AC Clipper for wind or Hydro designed to work with the Midnite Classic.
$2,716.71 $2,089.78
$2,716.71 $2,089.78
Midnite Solar, MNCLIP4KAC1.0, 4, 000 watt AC Clipper for wind or Hydro designed to work with the Midnite Classic.
$2,716.71 $2,089.78
$2,716.71 $2,089.78
Midnite Solar, MNCLIP4KDC3.0, 4, 000 watt DC Clipper for wind or Hydro designed to work with the Midnite Classic.
$2,861.68 $2,201.29
$2,861.68 $2,201.29